Warranty: 2 years
Limit Function: In order to facilitate the setting of travel position, double CAM is used.
Process Control: All actuators are tracked by Two-dimensional bar code.
Appearance design: Patented streamlined design, small size, light weight, suitable for small space applications.
Operational Safety: In order to ensure the safe operation of the motor, the F pole insulated motor is used to detect the temperature of the motor through the temperature control switch.
Anti-Corrosion resistance: The housing is coated with anti-corrosion epoxy powerder coating, which has strong adhesion and corrosion resistance. All fasteners are stainless steel for outdoor applications.
Indicator:Indicator of pointer; optional: 3D opening indicator
Wiring Simple: Plug-in terminal for easy connection
Reliable Sealing: Adopt long-acting sealing ring design, effectively ensure water-proof grade.
Moisture Resistance: Installed with heater inside the actuator to prevent condensation and extend the life of the actuator.
Manual Operation: In case of power failure, use a wrench to adjust the valve manually
Connecting Flange: The bottom connection holes are in accordance with ISO5211 standard, also with double flanges and octagon drive sleeve, The installation angle can be changed flexibly to connect the valve flange with different hole position and angle.
Packaging: In order to better packaging products, Shanghai FLOWINN uses pearl-cotton packaging
| Torque | 200-600N.m |
| Ingress Protection | IP67; Optional: IP68 |
| Working Time | On/off type: S2-15min; Modulating type: S4-50% |
| Applicable Voltage | AC110/AC220V Optional: AC/DC24V, AC380V |
| Ambient Temperature | -25°-60° |
| Relative Humidity | ≤90%（25°C) |
| Motor Specifications | Class F, with thermal protector |
| Output Connect | ISO5211 direct connection, star bore |
| Modulating Functional Configuration | Support loss signal mode, signal reversal selection function |
| Manual Device | 6mm Allen manual wrench operation |
| Position Indicator | Flat Pointer Indicator； optional：3D opening indicator |
| Input Signal | On/off type: On/off signal; Modulating type: Standard 4-20mA (input impedance: 150Ω); Optional:0-10V; 2-10V; Optoelectronic isolation |
| Output Signal | On/off type: 2- dry contact and 2-wet contact; Modulating type: Standard 4-20mA (output impedance: ≤750Ω). Optional: 0-10V; 2-10V; Optoelectronic isolation |
| Cable Interface | On/off type: 1*PG13.5; Modulating type: 2*PG13.5 |
| Space Heater | Standard |