Warranty: 2 years
Manual Operation: The whole series of products are equipped with handwheel operating mechanism, which is convenient for debugging and emergency manual operation, and the flashlight is automatically switched, which is safe and reliable.
Infrared remote control: Smart actuators can provide different remote controls according to different application requirements, such as portable infrared remote controls for ordinary places and explosion-proof remote controls for hazardous places.
Operational Safety:Class F (class H optional) insulated motor. The motor winding is equipped with a temperature control switch, which can sense the temperature of the motor and provide overheat protection to ensure the safe operation of the motor.
Anti-humidity Resistance: A heater is mounted inside the actuator to eliminate damage to electrical components from internal condensation.
Phase Protection: The phase detection and correction function can avoid damage to the driver due to wrong power supply phase connection.
Voltage Protection: Protects against high and low pressure conditions.
Overload Protection: When the valve is blocked, the power is automatically shut off to prevent further damage to the valve and actuator.
Operational Diagnosis:The intelligent actuator is equipped with a variety of sensing devices, which can reflect the control signal received by the actuator, fault alarm, operating parameters, status indication and other functions in real time. The multiple diagnostic functions are convenient for users to locate faults.
Password Protection: The intelligent actuator is equipped with hierarchical password protection, which can be authorized to different operators to prevent misoperation caused by improper use.
|
Force range |
1000-25000N |
|
Max stroke |
100mm |
|
Running time |
55-179S |
|
Ambient temperature |
-25°C---+70°C |
|
Anti-vibration level |
JB/T 8219 |
|
Noise level |
Less than 75dB within 1m |
|
Electrical interface |
Two PG16 |
|
Ingress Protection |
IP67 |
|
Optional |
IP68 |
|
Motor Specifications |
Class F.with thermal protector up to +135° |
|
Coptional |
Class H |
|
Working System |
On/off type, S2-15min, no more than 600 times per hour start; |
|
Modulating type |
S4-50%, up to 600 triggers per hour; |
|
Optional |
1200 and 1800 times per hour. |
|
Applicable Voltage |
4V-240V； |
|
Single phase |
DC24V2 |
|
Bus |
Modbus |
|
Input signal |
On/off type,20-60VAC/DC or 60-120VAC; Optoelectronic isolation; Modulating type. |
|
Input signal |
4-20mA; 0-10V; 2-10V;Accuracy 1%; |
|
Dead zone |
0-25.5% adjustable rate in full stroke. |
|
Input impedance |
75Ω（4-20mA） |
|
Signal Feedback |
On/off |
|
Type RexayX5 |
1.on/off in place;2.on/off over torque; 3.Local/remote;4.Center position;5.Multiple malfuntions to choose from; |
|
Optional |
4-20mA transmit. |
|
Malfunction Feedback |
On/off,typeTorqueprotection;Motor,overheat protection;Jammed,valve,protection; Instantaneous,reverse,protection;Broken,signal protection; Other alarms |
|
Output Signal |
4-20mA; |
|
Modulating type |
0-10V; |
|
Output signal |
2-10V; |
|
Output impedance |
≤750Ω（4-20mA） |
|
Indication |
LCD screen openning indicator; On/off remote control/fault indicator |